Horticultural greenhouse flow

CFD simulations
for industrial
flow problems

When flow becomes a problem, we find the solution.

CFD simulations
for industrial
flow problems

When flow becomes a problem, we find the solution.

When can CFD help?

When can CFD help?

Possible scenarios

Possible scenarios

The prototype does not perform as expected

After a long development phase, the moment has finally arrived: the first prototype of a new product, machine or process is ready for testing. Everything seems to have been considered. Yet during testing, unexpected flow phenomena throw a spanner in the works. The cause is not immediately visible, and trial-and-error adjustments cost time and money.

With CFD simulations, FlowMotion maps the flow, pressure, temperature and other relevant variables in detail. This reveals where the problem originates. We then work with the client to investigate which adjustments are necessary to meet the desired specifications, within the practical limits of the design.

An existing installation is underperforming

A machine or installation has been functioning for some time, but is not delivering the expected capacity, product quality or energy efficiency. Temperatures are unevenly distributed, the pressure drop is too high or the flow does not reach all parts of the process. Measurements show that something is going wrong, but provide insufficient insight into the cause.

With a CFD model, we make visible what is happening inside the installation. We identify the bottlenecks and specifically investigate which changes will have the most effect. This allows an existing installation to be improved without immediately replacing expensive components or complete systems.

A new design must provide certainty in advance

A new product or process is still on the drawing board. Multiple design variants are possible, but it is uncertain which solution will function best in practice. Building a physical prototype is expensive and often provides answers to important questions only at a late stage.

With CFD simulations, different designs can be calculated and compared before construction. We investigate, for example, flow distribution, heat transfer, pressure losses and capacity. This allows weak points to be detected early and the design to be specifically optimised. This reduces development risk and prevents costly adjustments later on.

Production must increase, but the limits are unknown

Demand is increasing and an installation needs to produce more. But what happens to the flow, temperature distribution, residence time or product quality when the flow rate is increased? Without sufficient insight, a capacity increase can lead to new bottlenecks, higher energy consumption or an unstable process.

With CFD, we map the current operation of the installation and calculate various future operating conditions. This makes it visible where the actual limits lie and which adjustments are necessary to responsibly increase capacity. The client can therefore invest based on technical insight instead of assumptions.

What do we make visible?

What do we make visible?

Results, what do you get from CFD simulations?

Results, what do you get from CFD simulations?

CFD FAQ

CFD FAQ

questions and answers

CFD stands for Computational Fluid Dynamics. With CFD software, flows of liquids and gases are calculated numerically. In this process, variables such as velocity, pressure, temperature, heat transfer and concentrations can be made visible.

A CFD calculation is particularly useful when flow or heat transfer influences the operation of a product, machine or process. CFD can be used to investigate problems, compare designs and improve performance before costly adjustments are carried out.

With CFD, airflow and liquid flows, pressure drops, ventilation, cooling, heating, mixing, heat transfer, natural convection, particle transport and multiphase flows can be investigated, among other things.

Yes. Especially during the concept and design phase, CFD can offer great value. Different designs can be digitally calculated and compared before a prototype or installation is built.

Yes. Measurements and practical experience can be used to build a CFD model of an existing installation. This can be used to investigate why the installation is underperforming and which adjustments have the most effect.

This differs per project. Usually, a geometry or technical drawing, dimensions, flow rates, pressures, temperatures, material properties and a clear description of the problem are required. During an initial meeting, we determine together what information is available and necessary.

Not always. Depending on the issue, a simplified model may be sufficient. A good simplification shortens the calculation time without losing important flow phenomena. FlowMotion determines which details are relevant for the analysis.

The reliability depends on the quality of the geometry, the computational grid, the physical models and the specified boundary conditions. Therefore, we do not only check the numerical convergence, but we also assess whether the results are physically logical. Where possible, we compare the results with measurements, practical data or theoretical relationships.

CFD can significantly reduce the number of physical prototypes and tests, but it does not completely replace them in every situation. Often, a combination of simulations, measurements and practical tests provides the most certainty. CFD primarily makes visible where and why certain behaviour occurs.

Yes. With the same CFD model, different geometries, settings and operating conditions can be compared objectively. This makes it clear which adjustment provides the best combination of performance, reliability and energy usage.

Yes. CFD can make energy losses visible that arise from, for example, high flow resistance, poor air distribution, insufficient heat transfer or unnecessarily large fan and pump capacities. Targeted improvements can then be calculated.

The costs depend on the geometry, the complexity of the physics, the number of scenarios and the desired level of detail. After an initial substantive discussion, you will receive a clear project description and price quote.

The results are presented in clear contour plots, graphs, animations and technical explanations. The focus is on the conclusions: what causes the problem, which adjustment is effective, and what does this mean for the final design or process?

FlowMotion has specialised in industrial flow issues since 1996. With more than 1,250 projects completed, we combine in-depth knowledge of fluid dynamics with practical experience in machines, installations and production processes. For us, CFD is not an end product, but a tool to arrive at a demonstrably better solution.