CFD visualisation of streamlines, recirculation and vortex formation in an industrial plant.
CFD visualisation of streamlines, recirculation and vortex formation in an industrial plant.

Flow patterns and streamlines analysed with CFD

A flow may appear simple at first glance, while complex vortices, recirculation zones and dead zones form within a plant. Streamlines help to make these patterns insightful. Using CFD, we demonstrate how a fluid or gas flows through the system and where the actual behaviour deviates from the design.

CFD visualisation of streamlines, recirculation and vortex formation in an industrial plant.

Flow patterns and streamlines analysed with CFD

A flow may appear simple at first glance, while complex vortices, recirculation zones and dead zones form within a plant. Streamlines help to make these patterns insightful. Using CFD, we demonstrate how a fluid or gas flows through the system and where the actual behaviour deviates from the design.

Typical problems

Typical problems

Typical problems

  • The flow travels directly from the inlet to the outlet.

  • A portion of the system is barely reached by the flow.

  • Unexpected recirculation zones form behind obstacles.

  • Temperature or concentration remains locally too high or too low.

  • The flow causes noise, vibrations or instability.

  • Supply openings do not reach the entire desired area.

  • The average flow rate appears correct, but performance is lagging.

  • Measurements cannot determine the cause of the problem.

What we investigate

What we investigate

What we investigate

  • Recirculation zones and dead zones.

  • A portion of the system is barely reached by the flow.

  • Short-circuiting flows between inlet and outlet.

  • Vortex formation and flow separation.

  • Wake regions behind obstacles.

  • The distribution across different flow paths.

  • The relationship with velocity, pressure, temperature and concentration.

  • Changes in the flow pattern under different operating conditions.

Potential improvements

Potential improvements

Potential improvements

  • Adjust the flow direction of supplies.

  • Reposition inlets and outlets.

  • Apply guide vanes or flow straighteners.

  • Adjust obstacles and sudden transitions.

  • Reduce dead zones.

  • Prevent short-circuiting flows.

  • Distribute the flow more evenly across the available volume.

  • Compare design variants before modifying the plant.

Applications

Applications

Applications

  • Pipes and air ducts.

  • Process vessels and storage tanks.

  • Ventilation and air distribution.

  • Heat exchangers and cooling installations.

  • Pumps, fans and internal components.

  • Furnaces and drying installations.

  • Exhaust and extraction systems.

  • Wind flow around buildings and industrial plants.

Our approach

Our approach

Our approach

  • We collect the geometry and relevant operating conditions.

  • We discuss the observed problem and the desired flow behaviour.

  • We build a CFD model of the actual situation.

  • We calculate the full velocity, pressure and turbulence field.

  • We visualise key patterns with streamlines and cross-sections.

  • We investigate the cause of vortices, recirculation and dead zones.

  • We compare potential adjustments and translate these into practical improvements.

Why FlowMotion

Why FlowMotion

Why FlowMotion

  • Technical interpretation behind the CFD visualisations.

  • Over thirty years of experience with complex flow patterns.

  • Streamlines are linked to measurable flow quantities.

  • Clear explanation for both technical and non-technical stakeholders.

  • Practical recommendations within existing design constraints.

  • Direct consultation with an experienced CFD specialist.

Would you like to understand flow patterns and streamlines in your system?

Tell us about your system, its operating conditions and the problems you have observed. We will discuss how CFD can identify the causes and assess practical improvements.