
The pump or fan is consuming more energy than anticipated.
The plant is delivering less capacity than expected.
High pressure drop occurs across valves, bends, filters or constrictions.
Parallel piping or outlets are unevenly loaded.
Local pressure spikes are causing noise, vibration or instability.
There is a risk of cavitation or undesirable negative pressure.
It is unclear which component is causing the greatest resistance.



Pressure drop across piping, ducts and individual components.
The static and total pressure throughout the entire flow domain.
Local pressure gradients and pressure spikes.
The distribution across parallel flow paths.
The resistance of bends, valves, filters and constrictions.
The relationship between pressure, velocity and turbulence.
The operating point of pumps or fans when the required data is available.

Reducing unnecessary constrictions or sudden changes in cross-section.
Designing bends and transitions to be more streamlined.
Adjusting pipe or duct diameters.
Repositioning valves, filters and other components.
Optimising the geometry of distributors and manifolds.
Distributing the flow more evenly across multiple outlets.
Lowering the required pump or fan power.
Comparing different design variants before implementation.



Pumps, fans and compressors.
Piping networks and air ducts.
Distributors and manifolds.
Filters and heat exchangers.
Process equipment and pressure vessels.
Ventilation and extraction systems.
Cooling circuits and transport systems.
Industrial valves, bends and constrictions.

We check the geometry and available measurement or design data.
We discuss the problem, operating conditions and required performance.
We build a CFD model with the relevant inlets, outlets and wall boundary conditions.
We calculate the pressure, velocity and flow distribution.
We determine where the main pressure drops originate.
We investigate targeted design modifications or alternative operating conditions.
We present the results in clear visualisations and practical recommendations.



More than 1,250 projects completed.
Over thirty years of experience with industrial flow issues.
Technical analysis coupled with practically implementable improvements.
Clear visualisations of pressure drop and pressure distribution.
Independent assessment of existing and new designs.
Direct consultation with an experienced CFD specialist.
Would you like to understand pressure and pressure drop in your system?
Tell us about your system, its operating conditions and the problems you have observed. We will discuss how CFD can identify the causes and assess practical improvements.
